TT Quattro Coupe V6-3.2L (BHE) (2005)
/Page-1949005.png)
2 -
Steering column switch with coil connector
3 -
Clamping bolt
a - = 3 mm
-
Install steering column switch on steering lock housing.
-
Install steering wheel with old bolt.
-
Align steering column switch horizontally and adjust to dimension - a -. Then tighten clamping bolt - 3 -.
-
Remove steering wheel again.
-
Install upper and lower gap cover.
-
Install upper and lower trim for steering column switch.
-
Install drivers side storage compartment.
-
Install steering wheel and airbag module.
