TT Quattro Coupe V6-3.2L (BHE) (2005)
/Page-1956006.png)
-
Attach pendulum support and exhaust system bracket.
-
Install tie rods in steering arms and secure in place. If the joint pin is also turned when tightening, counterhold with Torx key T40.
-
Connect return line to fluid reservoir.
-
Remove hose clamp from intake hose.
-
Install noise insulation.
-
Push universal joint onto steering pinion and secure with new bolt - 1 -, 30 Nm.
-
Install cover.
-
Fill with hydraulic fluid.
