TT Quattro Coupe V6-3.2L (BHE) (2005)
-
Draw in joint centrally by turning the spindle.
Removing upper ball joint
-
Lubricate spindle with universal grease G 052 735 A5.
-
Attach tools as shown in illustration.
-
Pull out ball joint by turning spindle.
Installing upper ball joint
-
Attach tools as shown in illustration.
-
Pull in ball joint - 1 - by turning spindle.
-
Install brake disc (if removed).
Tightening torque of phillips-head screw: 4 Nm
-
Check that there is sufficient clearance between splash plate and brake disc.
-
If necessary, ensure correct clearance.