TT Quattro Coupe V6-3.2L (BHE) (2005)
Ball Joint: Testing and Inspection
Ball joint, checking
Checking axial play
-
Pull control arm firmly downwards and press back up again.
Checking radial clearance
-
Press wheel firmly inward and outward.
Note:
^
There should not be any noticeable or visible "play" in either of the two checks.
^
Observe lower ball joint while performing checks.
^
Make allowance for any wheel bearing play or "play" in strut mounting at top.
^
Check rubber boot for damage, replace lower ball joint if necessary.