TT Quattro Coupe V6-3.2L (BHE) (2005)
27 -
Hex bolt, 25 Nm
^
M8 x 20
Installation position of upper and lower halves of subframe bushing
A - Upper half of bushing without collar, ribs faces body.
B - Lower half of bushing, collar faces bolt head
Installation position of subframe cross piece
Cross piece is not installed on all vehicles.
F - Direction of travel
1 -
Subframe
2 -
Pop rivet nut, M10
-
Insert using V.A.G 1765B.
3 -
Cross piece
-
Install with marking "L" or "links" on left as seen facing in direction of travel.
-
Foam strip faces downward - arrow -.
4 -
Hex bolt, M10x45
-
Use new bolts after disassembling.
-
Use locking fluid D 000 600 A2 when installing.
-
Tightening torque: 30 Nm plus an additional 90° (1/4 turn)
^
Pop-rivet tongs V.A.G 1765B