TT Quattro Coupe V6-3.2L (BHE) (2005)
-
Remove spring compressor out of spring.
-
If necessary, remove coupling rod - arrow - from stabilizer bar.
The lower bolt for the shock absorber is then easier to install.
The remaining installation steps are carried out in reverse sequence.
The vehicle must be standing on its wheels when tightening the bolt connections with bonded rubber bushings.
Otherwise, the bushing would be subject to torsion and its service life shortened.
Use new bolts.
Removing and installing right spring
-
Removal and installation is the same as the left side.