audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Gear Oil Level, Checking and Topping Up|Page 3567 > < Gear Oil Level, Checking and Topping Up|Page 3565
Page 2
background image

Indicated on vehicle diagnostic, testing and information system VAS 5051:
-

Reading for gear oil temperature is shown in display zone - 1 -. 

Checking and correcting gear oil level 

CAUTION!  The filler hose, funnel and filler adapter VAS6262 must be clean; the gear oil must not be mixed with any other oil types. 

-

Shift selector lever into "P" position, apply parking brake.

-

Start engine and let it idle.

-

Press and hold brake pedal.

-

With brake pressed, select all gear positions "P, R, N, D, S" one after another at idling speed, maintaining each position for at least 3 seconds.

-

Drive vehicle onto a four-column hoist or over an inspection pit in order for it to be absolutely horizontal.

-

Remove center sound insulation fasteners - 1... 3 -.

CAUTION!  When working close to the radiator always maintain a safe distance from the fan - danger of injury! The fan may switch on
automatically.
 

-

Place drip tray V.A.G 1306 under transmission.

CAUTION!
^

Wear safety goggles.

^

Wear protective gloves (acid resistant). 

Indicated on vehicle diagnostic, testing and information system VAS 5051:
-

Read gear oil temperature in display zone - 1 -.

Gear Oil Level, Checking and Topping Up|Page 3567 > < Gear Oil Level, Checking and Topping Up|Page 3565