TT Quattro Coupe V6-3.2L (BHE) (2005)
-
Remove pendulum support from subframe - arrows A -.
-
Remove intermediate bearing for drive shaft from vehicle - arrows -.
-
Carefully push engine/transmission toward front and while doing this bring pendulum support in front of subframe to system - arrow _.
-
Secure pendulum support with bolt - 1 - (8 x 80 mm) and nut - 2 - to subframe.
-
In case of damage to paint, repair as follows: Remove grease residue using nitro-thinner L 001 600. Apply 2-component acrylic paint ALN 769
041 with hardener ALZ 009 001.