TT Quattro Coupe V6-3.2L (BHE) (2005)
-
Insert thrust bolts - 1 - in wheel bearing housing.
-
Attach support - 2 -, hollow piston cylinder - 3 - with pull rod and special nut - 4 -.
-
Hold appliance firmly and pull wheel hub out.
1 -
Thrust bolt E-15
2 -
Support E-40
3 -
Hollow piston cylinder HKZ-15
4 -
Special nut E-8-214 and pull rod
5 -
High pressure hose with quick-release coupling
Pulling out wheel bearing
-
Remove securing ring.
-
Set up thrust piece - 1 - with collar facing wheel bearing, thrust sleeve - 2 - with four stepped internal diameters toward wheel bearing housing and
hollow piston cylinder - 3 - with pull rod and special nut - 4 -.
-
Pull out wheel bearing by actuating pump.
1 -
Thrust piece E-5
2 -
Thrust sleeve E-65-1
3 -
Hollow piston cylinder HKZ-15
4 -
Special nut E-8-214 and pull rod
Pulling inner bearing race off hub
-
Insert special tool - 3423 - as shown.
-
Screw cross-piece Kukko -18-0- into special tool - 3423 -.
-
Mount special tool - 40-105 - on wheel hub and pull off inner bearing race by turning spindle.