TT Quattro Coupe V6-3.2L (BHE) (2005)
-
Insert special tool 3424 into slot - arrow -.
-
Turn ratchet through 90° and detach from 3424.
-
Pull wheel bearing housing downward off shock absorber tube.
When installing, note the following points in particular: notes and table.
Refer to notes and table
-
Clean inner splines of wheel hub.
-
install new 12-point nut as far as possible.
-
Secure brake caliper to wheel bearing housing.
-
Insert connector and wire for ABS wheel speed sensor in brackets.
-
Lower vehicle, but make sure that wheels do not touch ground yet.
Otherwise the wheel bearing could be subject to excessive load and damaged.
-
Have a second technician press the brake pedal.
-
Tighten 12-point nut.