TT Quattro Coupe V6-3.2L (BHE) (2005)
/Page-1202001.png)
Differential Lock Hydraulic Fluid Filter: Service and Repair
Oil filter for Haldex clutch, replacing
Special tools, testers and auxiliary items required
^
Wrench T10066
Removing
-
Place drip tray underneath.
-
Use key T10066 to loosen and remove oil filter.
Installation position: The oil filter - A - is located on right side of vehicle, concealed by subframe, near front mounting bracket - B -.
Installing
-
Lightly coat O-ring of new oil filter with oil for Haldex clutch.
-
Install oil filter - A - and tighten to 35 Nm using Key T10066.
-
Check oil level in Haldex clutch, change oil level in Haldex clutch if necessary.
