TT Quattro Coupe V6-3.2L (BHE) (2005)
Back Window Glass: Service and Repair
Rear Window, Removing
Rear Window, Removing
NOTE: Always wear protective goggles and leather gloves when removing a window.
-
Remove tailgate trim.
-
Pull off or unscrew connections for heated rear window and rear window antenna.
-
Press connections against window glass toward center of vehicle.
-
Detach third brake light.
-
Pierce adhesive bead using trimming needle - 1 - with handle - 2 -.
-
Trimming needle should be kept as close as possible to window when cutting bead.
-
Unscrew handle and insert cutting wire into eye of needle.
-
Feed cutting wire into winding device - 1 - and secure.
-
Lay cutting wire around rear window under trim strip as shown.
-
Pull end of cutting wire through adhesive bead toward the inside in the same way, and secure with tailgate hinge securing bolts.
-
Unscrew hexagon bolt - arrow - and use it to secure end of cutting wire.
-
Tighten bolt to 21 Nm after removing window.