TT Quattro Coupe V6-3.2L (CBRA) (2008)
/Page-2540001.png)
Hood Hinge: Service and Repair
Hood Hinge
1
Hood
2
Gas strut
‹› Engage hood side of gas-filled strut tube
‹› Removal => [ Hood Gas-Filled Strut Assembly Overview ] See: Hood Shock / Support/Service and Repair/Removal and Replacement/Hood
Gas-Filled Strut Assembly Overview
3
Nut
‹› 25 Nm
4
Hood hinge
-
Before removing a hinge, support hood or secure it against falling down.
‹› Gas-filled strut removed.
‹› Remove bolts - 3 - and nuts - 5 -.
‹› When removing, remove both hood hinges.
5
Nut
‹› 25 Nm
