TT Quattro Coupe V6-3.2L (CBRA) (2008)
Trunk / Liftgate Interior Trim Panel: Service and Repair
Lower Rear Lid Trim, Removing and Installing
Lower Rear Lid Trim, Removing And Installing
Special tools, testers and auxiliary items required
-
Trim removal wedge 3409
Removing
-
Disengage parcel shelf.
-
Remove bolts - 2 -.
-
Unclip lower rear lid trim - 1 - with Trim Removal Wedge 3409.
Installing
Installation is reverse of removal. Observe the following when doing so:
NOTE:
-
If trim clamps remain in body mounting points, remove these and insert them in trim.
-
Check clamps for damage or deformation, replace if necessary.