TT Quattro Coupe V6-3.2L (CBRA) (2008)
/Page-2583004.png)
Dimension - a - = 2 - 3 mm.
-
Align (T10214/2) on subframe with pressed in bonded rubber bushings. Edges of bonded rubber bushing inner core - 1 - must run on imaginary
line parallel to edge of (T10267) - 2 -.
Distance - a - must be identical at left and right to guarantee parallelism.
-
Subframe makes contact on smaller inner diameter of (T10244/3 ).
-
Press in bearing on stop and until a pressing force of 20 kN has been obtained.
