TT Quattro Coupe V6-3.2L (CBRA) (2008)
-
Remove left and right connecting bolts for front part of longitudinal member.
-
Attach adapters with one M8x30 bolt each to longitudinal members - arrow -.
‹› The illustration shows the left side of the vehicle.
-
Insert square tube (T40091/1) in connector (T40091/3) and supports (T40093/3) as shown in illustration.
-
Slide connector (T40093/4) onto square tube.
-
Slide support (T40091/2) into both connectors (T40093/4) with slide ( T40093/5).
CAUTION!
Risk of accident due to loose engine support bridge spindles.
‹› Secure (T40091/2) with connector pins and ( T40093/4).
‹› Secure connector and supports with clamping screws.
-
Install (10 - 222 A /11) on slider and on engine lifting eye.
-
Tension engine/transmission subframe by evenly tightening the 3 spindles.
-
Remove subframe mount bolts on engine - arrows -.