TT Quattro Coupe V6-3.2L (CBRA) (2008)
/Page-2624007.png)
-
Slide tunnel support reinforcement - 1 - onto left support - 2 - as far as stop.
‹› Do not switch bolts - A arrows - and - B arrows - in their bolting points. The bolts are different lengths.
-
Install bolts - A arrows - (M6, 20 mm long) and - B arrows - (M6, 12 mm long) in front tunnel - 3 - and tighten by hand.
-
Tighten the bolts - arrows A - and - arrows B -.
CAUTION!
Ignition must be on when connecting battery. If pyrotechnic components (e.g. airbag, belt tensioner) are not repaired correctly, they may
deploy unintentionally after connecting battery. There must not be anyone inside the vehicle when connecting the battery.
-
Switch on ignition.
-
Connect battery with ignition on.
-
If Airbag Malfunction Indicator Lamp (MIL) (K75 ) indicates a fault after installation, DTC memory must be checked, deleted and checked again.
Tightening specifications, refer to => [ Central Tube Assembly Overview ] See: Central Tube Overview.
