TT Quattro Coupe V6-3.2L (CBRA) (2008)
Trim Panel: Service and Repair
Sill Panel Trim
Sill Panel Trim
Special tools, testers and auxiliary items required
‹› Trim Removal Wedge (3409)
Removing
-
Remove side trim - 1 -. See: Rear Side Trim
-
Unclip sill panel strip - 3 - with Trim Removal Wedge (3409).
Installation
To install, perform the steps used in removal in reverse order. Observe the following when doing so:
‹› If trim clamps remain in body mounting points, remove these and insert them in trim.
‹› Check clamps for damage or deformation, replace if necessary.
-
Stretch door seal lip - 2 - over sill panel strip - 3 -.