TT Quattro Coupe V6-3.2L (CBRA) (2008)
/Page-2827004.png)
-
Rivet the suspension strut tower mount to the longitudinal member using the rechargeable riveter (VAS 5279A).
Imprint the drilled holes from the outside toward the inside. Use the rechargeable riveter (VAS 5279A)D15 and D16 punch from (VAS 5279/2) or the
rechargeable riveter (VAS 5279B) with D15 and D16 punch.
-
Weld the new part with a gas-shielded arc continuous weld seam using the gas-shielded welder 250A (VAS 6388).
-
Weld the separation cut in the plenum chamber bulkhead with a gas-shielded arc continuous weld seam using the gas-shielded welder 250A (VAS
6388).
-
Weld the new part with a gas-shielded arc continuous weld seam using the gas-shielded welder 250A (VAS 6388).
