TT Quattro Coupe V6-3.2L (CBRA) (2008)
/Page-1381001.png)
Wheel Speed Sensor: Service and Repair
Front Wheel Speed Sensor
Wheel Speed Sensor
‹› The ABS sensor ring/rotor is installed in the respective wheel bearing unit and should not be replaced.
1 - Wheel speed sensor
‹› Removing and installing
2 - Socket head bolt
‹› 8 Nm.
Removing and Installing
Removing
-
Release connector - 1 - on speed sensor and disconnect.
-
Remove bolt - 2 -.
-
Remove speed sensor - 1 - from wheel bearing housing.
Installing
Installation is reverse of removal, with special attention to the following:
