TT Quattro Coupe V6-3.2L (CBRA) (2008)
/Page-1399002.png)
‹› Insert in brake caliper housing
7 - Brake caliper housing
8 - Retaining spring
‹› Observe correct installed position.
‹› Hook in at both brake caliper housing studs and at outer brake pad retaining spring.
9 - Protective cap
‹› Do not damage when installing piston
‹› Coat with lithium grease (G 052 150 A2)
10 - Pistons
‹› Apply thin coat of lithium grease ( G 052 150 A2 ) to piston beforehand
11 - Sealing ring
‹› Coat with lithium grease (G 052 150 A2)
