TT Quattro Coupe V6-3.2L (CBRA) (2008)
/Page-1442002.png)
-
Remove center console trim
-
Remove release knob - 1 -.
‹› Note different versions of parking brake trim.
-
Release one-piece parking brake trim - 2 - and pull forward.
-
Release handle on two-piece trim and pull forward.
-
Remove two-piece parking brake trim.
-
Unclip parking brake switch - 4 -.
-
Disconnect electrical connector.
Installing
-
Installation is in reverse order of removal.
After installing parking brake switch, parking brake must not be adjusted.
