audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Engine Coolant Temperature Sensor on Radiator, Checking|Page 2354 > < Engine Coolant Temperature Sensor on Radiator, Checking|Page 2352
Page 3
background image

‹› Range A, 30° C equals a resistance of 1.5 to 2.0 kOhms

‹› Range B, 80° C equals a resistance of 275 to 375 Ohms

If any of the specified values was not obtained:

-

Replace the the Engine Coolant Temperature (ECT) Sensor ( G62). 

°Testing if display is approx. - 40.0 C:

-

Disconnect the Engine Coolant Temperature (ECT) Sensor (G62) electrical harness connector - arrow -. 

-

Using a jumper wire, connect the Engine Coolant Temperature (ECT) Sensor (G62) electrical harness connector terminals 1 to 2.

-

 Check the value indicated on the scan tool display.

Engine Coolant Temperature Sensor on Radiator, Checking|Page 2354 > < Engine Coolant Temperature Sensor on Radiator, Checking|Page 2352