TT Quattro Coupe V6-3.2L (CBRA) (2008)
‹› With engine removed, coolant pump bolts can be reached through pulley holes. In this case, ribbed belt pulley must not be removed.
-
Remove bolts - 1 - for coolant pump - 2 -.
-
Tip coolant pump forward and out.
Installing
‹› Tightening specifications, refer to => [ Ribbed Belt Drive Component Overview ] See: Engine/Drive Belts, Mounts, Brackets and
Accessories/Drive Belt/Service and Repair/Ribbed Belt Drive Assembly Overview.
Installation is in reverse order of removal, note the following:
‹› Replace O-ring.
-
Clean and/or smooth O-ring sealing surface.
-
Coat O-ring with coolant additive G12+.
-
Insert coolant pump - 2 -.