TT Quattro Coupe V6-3.2L (CBRA) (2008)
/Page-571004.png)
-
Measure with external micrometer 75 to 100 mm as follows:
‹› Approximately 6 mm from bottom edge.
‹› Offset 90° to piston pin axle.
Deviation from nominal dimension:
‹› Maximum 0.04 mm.
Nominal dimension, refer to => [ Piston and Cylinder Dimensions ] See: Specifications.
Cylinder Bore, Checking
-
Measure with internal dial gauge 50 to 100 mm as follows:
‹› Diagonally at 3 positions transversely - A - and longitudinally - B -.
Deviation from nominal dimension:
