TT Quattro Coupe V6-3.2L (CBRA) (2008)
Oil Pressure Sender: Service and Repair
Oil Pressure Switch
Special tools, testers and auxiliary items required
‹› Assembly Tool (T10118)
Removing
-
Remove ribbed belt. Refer to => [ Ribbed Belt ] See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Ribbed Belt.
-
Remove oil dipstick.
-
Remove bolt - 3 -, remove oil dipstick guide tube - 2 - and lay aside.
‹› Ignore - 1 and 4 -.
-
Remove noise insulation in center by loosening mounting parts - 1 through 4 -.
-
Disconnect electrical harness connector - 1 - for A/C clutch on A/C compressor and free up electrical wire.