TT Quattro Coupe V6-3.2L (CBRA) (2008)
-
Replace timing chain upper cover sealing ring. Refer to=> [ Timing Chain Upper Cover Seal ] See: Timing Chain Upper Cover Seal.
-
Clean sealing surfaces, must be free of oil and grease.
-
Check whether fitting sleeves - 2 - and - 3 - are inserted in upper timing chain cover.
-
Insert new sealing ring - 1 - and new seal - 4 -.
-
Lightly coat clean sealing surface - shaded - on timing chain upper cover with sealant.
-
Coat sealing surface below cylinder head seal with some sealant. Do not bend cylinder head seal.
‹› Timing chain upper cover must be installed with 5 minutes of applying sealant.
-
Position upper timing chain cover and tighten => [ Upper Timing Chain Cover - Tightening Specifications
and Tightening Sequence ] See: Timing Cover/Service and Repair.
-
Install camshaft timing chain tensioner - arrow -.