TT Quattro Coupe V6-3.2L (CBRA) (2008)
/Page-2055002.png)
-
Remove bracket - A -.
-
Mark connector - C - to Defroster Door Motor (V107) (danger of interchange with other connectors of same construction).
-
Disconnect connector - C - from Defroster Door Motor (V107).
-
Remove bolts - A -.
-
Remove control motor - B -.
-
Loosen lever - E - on Defroster Flap Motor (V107) from the connecting rod - D -.
Installing
‹› Lever - E - on control motor and connecting rod - D - are color-coded, they are colored blue for Defroster Door Motor (V107).
Reinstall all removed components in the opposite sequence while observing the following:
-
Install the wiring harness so that it cannot come in contact with any moving parts (e.g. the actuating arm of the control motor).
-
Check Climatronic Control Module (J255) A/C (heater) control head DTC memory and erase any possible displayed malfunctions Vehicle
Diagnosis, Testing and Information System VAS 5051 under "Guided Fault Finding
-
Perform a basic setting and output diagnostic test on the A/C (heater) and check the DTC memory one more time. Refer to Vehicle Diagnosis,
Testing and Information System VAS 5051 under "Guided Fault Finding.
