TT Quattro Coupe V6-3.2L (CBRA) (2008)
/Page-2135002.png)
-
Remove the Fresh Air Blower (V2) housing - C - from A/C unit.
-
Disconnect connector - D -.
Installing
Reinstall all removed components in the opposite sequence while observing the following:
‹› When installing, ensure Fresh Air Blower (V2) is seated correctly in A/C unit.
‹› After installing, check seating of Fresh Air Blower (V2) housing in A/C unit and function of Fresh Air Blower Control Module (J126).
-
Check Climatronic Control Module (J255) A/C (heater) control head DTC memory and erase any possible displayed malfunctions Vehicle
Diagnosis, Testing and Information System VAS 5051 under "Guided Fault Finding"
-
Perform a basic setting and output diagnostic test on the A/C (heater) and check the DTC memory one more time. Refer to Vehicle Diagnosis,
Testing and Information System VAS 5051 under "Guided Fault Finding".
