TT Quattro Coupe V6-3.2L (CBRA) (2008)
/Page-352003.png)
-
Install adapter for oil filling (VAS 6262) - A - in inspection plug opening and tighten by hand.
-
Hold container with adapter for oil filling ( VAS 6262) as high as possible over DSG transmission and let 5.5 liters of gear oil run into
transmission.
-
Start engine and run at idle.
-
Press brake and shift through all selector lever positions at idle, retaining each position for at least 3 seconds.
-
Place selector lever in position "P".
-
Gear Oil Level, Checking and Filling, refer to => [ Transmission Fluid, Checking and Filling ] See: Transmission Fluid, Checking and Filling.
After Replacing Gear Oil
-
Connect Vehicle Diagnosis, Testing, and Information System (VAS 5051B) to vehicle.
-
Select transmission guided functions.
-
Perform "Basic Setting" program.
