TT Quattro Coupe V6-3.2L (CBRA) (2008)
/Page-353007.png)
‹› Tightening Specifications, refer to => [ DSG Transmission Oil Assembly Overview ] See: DSG Transmission Oil Assembly Overview.
‹› Replace inspection plug gasket - arrow -.
-
Remove adapter for oil filling (VAS 6262) from transmission.
-
Tighten inspection plug - B -.
-
Install the noise insulation.
-
End function "Measured values" by pressing <- button.
-
Press "end output".
-
Switch ignition off and disconnect diagnostic connector.
