TT Quattro Coupe V6-3.2L (CBRA) (2008)
-
Remove transmission carrier.
-
Identify position of flexible disc and bevel box flange to each other.
-
Remove driveshaft flexible disc from bevel box - arrows - while counter holding at triangular flange with a lever.
-
Press engine/transmission assembly slightly forward (toward front end) and pull off driveshaft from bevel box.
CAUTION!
Risk of damaging sealing ring - arrow - in driveshaft flange.
‹› Press driveshaft horizontally as far back and to the right side of the vehicle as possible.
‹› If seal is damaged, driveshaft must be replaced.
-
Tie driveshaft up.