TT Quattro Coupe V6-3.2L (CBRA) (2008)
/Page-737002.png)
-
Loosen wiper arms one after another by tilting wiper axles slightly.
-
Remove nuts completely and remove wiper arms.
‹› If wiper arm cannot be removed in this way, use a standard puller.
-
Remove rubber seal - 1 - and remove plenum chamber cover - 2 - by carefully removing cover from retainers on windshield.
-
Free up rear engine wiring harness at partition for plenum chamber.
-
Remove bolt - arrow - and remove engine control module (ECM) from bracket.
