TT Quattro Coupe V6-3.2L (CBRA) (2008)
/Page-2262003.png)
-
Switch on ignition.
CAUTION!
Ignition must be on when connecting battery. If pyrotechnic components (e.g. airbag, belt tensioner) are not repaired correctly, they may
deploy unintentionally after connecting battery. There must not be anyone inside the vehicle when connecting the battery.
-
Connect battery ground cable with ignition switched on.
-
If Airbag Malfunction Indicator Lamp (MIL) (K75 ) indicates a fault after installation, DTC memory must be checked, deleted and checked again.
Refer to => Vehicle Diagnosis, Testing and Information System (VAS 5051 B).
Tightening specification, refer to => [ Front LATCH Child Seat Anchorages Assembly Overview ] See:
