TT Quattro Coupe V6-3.2L (CBRA) (2008)
Fuel Gauge Sender: Locations
Fuel Delivery Unit And Fuel Level Sensor Assembly Overview AWD
1
-
Fuel Level Sensor G
-
Resistance values, checking
2
-
Fuel delivery unit with sealing flange
-
Fuel pump electrical, checking
-
Checking residual pressure
-
after installing, fuel vehicle with at least 5 liters of fuel
3
-
Seal
-
Replace
-
Install dry
4
-
Fuel supply line
-
To fuel filter
-
Do not kink
-
Attaches to connection with identification "V" at sealing flange
-
To remove from locking flange, press release button on connecting piece
5
-
Fuel return line
-
From fuel filter
-
Do not kink
-
Attaches to connection with identification "R" at sealing flange
-
To remove from locking flange, press release button on connecting piece
6
-
Electrical harness connector
-
For Transfer Fuel Pump G6 and Fuel Level Sensor G
7
-
Locking ring
-
Use wrench T10202 for removal and installation
-
110 Nm
8
-
Fuel delivery line
-
From suction jet pump to fuel delivery unit
-
Clipped into fuel delivery unit
9
-
Electrical harness connector
-
For Fuel Level Sensor 2 G169