TT Quattro Coupe V6-3.2L (CBRA) (2008)
CAUTION:
Danger due to escaping fuel.
-
To prevent large quantities of fuel from escaping when removing Fuel Level Sensor 2 G169, fuel tank may only be a maximum of 1/3
full.
All Vehicles
-
Remove locking ring with Wrench T10202.
-
Carefully pull Fuel Level Sensor 2 G169 - 2 - and suction jet pump - 1 - partially out of fuel tank opening.
-
Remove seal.
-
Unclip suction jet pump from locking flange - arrows -.
NOTE: When removing, be sure not to bend floater arm of Fuel Level Sensor 2 G169.
Installing
-
Tightening specifications.
Installation is in reverse order of removal, note the following:
NOTE:
-
Replace seal.
-
When inserting, be sure not to bend floater arm on Fuel Level Sensor 2 G169.
-
Carefully insert Fuel Level Sensor 2 G169 in fuel tank opening.
-
Clip suction jet pump - 1 - to locking flange so that it is audibly engaged.