TT Quattro Coupe V6-3.2L (CBRA) (2008)
/Page-1861001.png)
Steering Angle Sensor: Service and Repair
Steering Angle Sensor
Removing
-
Remove steering column trim. See: Steering Column
-
Remove return spring with slip ring, refer to=> [ Airbag Spiral Spring/Return Spring with Slip Ring ] See: Restraint Systems/Air Bag
Systems/Clockspring Assembly / Spiral Cable/Service and Repair.
-
Remove Steering Angle Sensor (G85) - arrow -.
Installing
Install in reverse order of removal, observing the following:
-
After replacing the steering angle sensor (G85) it must adapted in "Guided Fault Finding" or in "Guided Functions " Vehicle diagnosis, testing and
information system VAS 5051.
