TT Quattro Coupe V6-3.2L (CBRA) (2008)
-
Remove the hex nut - arrow - from steering pinion.
Steering rack moves up to stop when this is done.
-
Turn steering gear with steering pinion upward.
-
Remove sensor wire. Refer to => [ Sensor Wire ] See: Sensor Wire.
‹› Sensor wire must be replaced. It is supplied in replacement part kit.
-
Mark position of steering pinion on steering gear housing.
-
Now pull steering pinion with steering torque sensor out of steering gear housing. Secure spiral spring against twisting using for example adhesive
tape.