TT Quattro Coupe V6-3.2L (CBRA) (2008)
/Page-1888004.png)
-
Pull thrust piece out of steering gear housing using suitable pliers for example (1847-2).
‹› If corrosion, damage, wear-out or first signs of contamination on steering rack can be seen, complete steering gear must be replaced.
‹› If no grease film is visible on steering rack, steering gear must also be replaced completely.
Installing and adjusting
-
Coat new thrust piece (contact surface at steering gear), sealing ring and hole in steering gear housing with grease (G 052 192 A1) supplied -
arrows -.
