TT Quattro Coupe V6-3.2L (CBRA) (2008)
-
Remove bolt -arrow- for tie rod -3-.
Pulling out bonded rubber bushing
-
Install tools as shown in illustration.
1. Nut 3346/3
2. Tappet 3390
3. Assembly tool 3350
4. Nut, commercially available
5. Spindle 3346/2
-
Remove bonded rubber bushing by turning spindle.
Pulling in bonded rubber bushing
-
Install tools as shown in illustration.
1. Nut 3346/3
2. Assembly tool 3346
3. Bonded rubber bushing
4. Fitting sleeve 3378
5. Nut, commercially available
6. Spindle 3346/2
Note:
^
Do not use lubricant!
^
Carefully install bearing to avoid canting.
-
Pull out bonded rubber mounting by tightening spindle.