TT Quattro Coupe V6-3.2L (CBRA) (2008)
Front Subframe: Adjustments
Subframe Mount, Adjusting
Subframe Mount, Adjusting
Special tools, testers and auxiliary items required
^
Engine support bridge 10 - 222 A
^
Hook 10-222A/10
^
Shackle 10 - 222 A/12
^
Bracket T10338
^
Engine Support Basic Set T40091
^
Engine Support Supplement Set T40093 with T40093/3-2 and T40093/3-3
Adjusting
Proceed as follows:
-
Remove EVAP canister with connected lines upward out of bracket - arrow - and lay aside.
-
Remove EVAP canister bracket.
-
Remove resonance tube - 2 - from air guide hose.
-
Remove air guide hose - 1 from Throttle Valve Control Module J338.
-
Disconnect electrical connector - 3 - for Mass Air Flow (MAF) Sensor G70.
-
Detach upper part of air filter housing - arrow and remove air filter insert.