TT Quattro Coupe V6-3.2L (CBRA) (2008)
-
Place Engine Support Bridge 10 - 222 A on upper edge of web plates with the following tool parts:
^
Bracket For Engine 10 - 222 A/1 qty. 2
^
Bracket With Spindle and Hook 10 - 222 A/10 (spindle faces back)
^
Spindle 10 - 222 A/11 (spindle faces forward)
^
Shackle 10 - 222 A/12
^
Connectors T40091/3 qty. 2
-
Engage Spindle 10 - 222 A /11 with Shackle 10 - 222 A/12 on right engine lifting eye.
-
Engage Bracket With Spindle and Hook 10 - 222 A/10 on Bracket T10338.
-
Tension engine/transmission subframe slightly with spindles.
-
Install adapter T40093/3-2 (left) and T40093/3-3 (right) on supports T40093/3.
-
Remove ground line from left longitudinal member.
-
Remove left and right connecting bolts for front part of long member.
-
Remove left and right connecting bolts for front part of longitudinal member.
-
Attach adapters with one M8x30 bolt each to long members - arrow -.
Note:
^
The illustration shows the left side of the vehicle.