TT Quattro Coupe V6-3.2L (CBRA) (2008)
Differential Output Shaft: Service and Repair
Right Flange Shaft
Right Flange Shaft
Special tools, testers and auxiliary items required
‹› Oil Collection and Extraction Device (VAG 1782)
‹› Puller (T10037)
‹› Socket and Key (T10107)
Removing
‹› Observe general repair notes. Refer to => [ Repair Information ] See: Service and Repair/Procedures/02EA Transmission/Repair Information.
‹› Observe cleanliness rules when working on transmissions. Refer to => [ Clean Working Conditions ] See: Service Precautions/02EA
Transmission/Clean Working Conditions.
-
Removing right drive axle.
-
Remove right drive axle heat shield - arrows -.
‹› The heat shield on a vehicle with a 3.2L MPI engine is shown in the illustration.
-
Place the oil collection and extraction device ( VAG 1782) under the transmission.
-
Remove right flange shaft bolt with socket and key (T10107) by installing 2 bolts in flange and counter holding flange shaft with assembly lever.