TT Quattro Coupe V6-3.2L (CBRA) (2008)
Seals and Gaskets: Service and Repair
Selector Shaft Seal
Selector Shaft Seal
Special tools, testers and auxiliary items required
‹› Tube (VW 423)
‹› Pulling Hook (T20143)
‹› Tightening Specifications, refer to => [ Flange Shaft and Seals on Transmission Assembly Overview ] See: Service and Repair/Removal and
Replacement/Final Drive, Differential (02EA Transmission).
-
Remove selector lever cable for selector shaft lever. Refer to => [ Selector Lever Cable ] See: Shift Linkage/Shift Cable/Service and Repair.
-
Remove nut - arrow -.
-
Carefully pry selector shaft lever - A - from selector shaft.
-
Pry seal out using pulling hook (T20143/1).