TT Quattro Coupe V6-3.2L (CBRA) (2008)
-
Pry center console trim out of console using trim removal wedge (3409) - arrows -.
-
Disconnect electrical connectors and remove center console trim.
-
Remove bolts - arrows - and remove selector lever boot trim - 1 - with selector lever scale illumination.
Installing
Install in reverse order, noting the following:
‹› => [ Selector Lever Handle with Side Locking Button and Scale Illumination Assembly Overview ] See: Selector Lever Handle with Side Locking
Button and Scale Illumination Assembly Overview
‹› => [ Selector Lever Handle with Front Locking Button and Scale Illumination Assembly Overview ] See: Selector Lever Handle with Front
Locking Button and Scale Illumination Assembly Overview
-
Make sure the trim clicks into the center console.