TT Quattro Coupe V6-3.2L (CBRA) (2008)
/Page-1202003.png)
-
To install, press hose/line assembly with new O-ring - 3 - into connection of bleeder, until securing clip audibly engages.
-
Verify by pulling on hose/line assembly.
Bleeder at slave cylinder, removing and installing
-
To remove, release securing clip - 2 - with a screwdriver and remove bleeder - 4 - from slave cylinder - 1 -.
-
To install, slide new O-ring - 3 - onto slave cylinder. Press in bleeder at slave cylinder connector until securing clip engages audibly.
-
Pull on bleeder to verify.
