TT Quattro Coupe V6-3.2L (CBRA) (2008)
-
If not, identify position of flexible disc and flange/driveshaft to rear final drive - arrows -.
-
Remove rear driveshaft tube with flexible disc and vibration damper from rear final drive - arrows -.
-
Remove driveshaft intermediate bearing from vehicle - arrows -.
-
Carefully detach rear driveshaft tube from centering pin.
‹› Do not cant driveshaft when removing, pull off from centering pin in horizontal position. Sealing ring in centering bushing - arrow - must not be
damaged.