TT Quattro Coupe V6-3.2L (CBRA) (2008)
-
Carefully remove rear driveshaft tube from flange/driveshaft centering pins on final drive.
‹› Do not cant driveshaft when removing, pull off from centering pin in horizontal position. Sealing ring in centering bushing - arrow - must not be
damaged.
‹› Flexible disc and vibration dampener cannot be separated from each other.
-
Identify location of rear flexible disc and flange from rear driveshaft tube to each other.
-
Remove flexible disc from driveshaft tube - arrows -.
Installing
Install in reverse sequence; note the following points:
‹› Sealing rings in driveshaft flanges - arrow - must not be damaged when removing and installing.