TT Quattro Coupe V6-3.2L (CBRA) (2008)
Seals and Gaskets: Service and Repair
Selector Mechanism Seal, Transmission Side, Replacing
Selector Mechanism Seal, Transmission Side, Replacing
Special tools, testers and auxiliary items required
‹› Tube (VW 423)
‹› Extractor lever (T20143/1)
‹› Sealing grease (G 052 128 A1)
-
Remove entire air filter housing => Fuel Injection
and Ignition 24 Removal and Installation.
-
Remove securing clip - 2 - and press relay lever - 3 - to side and out of mounting.
‹› If the relay lever cannot be removed due to transmission plate, remove selector cable from relay lever. Guide shoe out of transmission shift lever.
-
Remove nut - 4 - and remove transmission shift lever - 1 -.
-
Pry out seal using pulling hook (T20143/1).
-
Lightly oil new sealing ring on outer circumference.