TT Quattro Coupe V6-3.2L (CBRA) (2008)
Shifter M/T: Service and Repair
Shift Knob and Covers Assembly Overview
Shift Knob and Covers Assembly Overview
1
Shift knob with shift lever boot
‹› Cannot be separated from each other
‹› Always replace together
‹› Removing and installing => [ Shift Knob with Shift Lever Boot ] See: Shift Knob with Shift Lever Boot
‹› Disconnecting from center console cover => [ Center console trim and mounting frame/shift
lever boot, disconnecting ]
‹› Disconnecting from mounting frame => [ Mounting frame and shift lever boot, disconnecting ]
2
Clamp
‹› To secure shift knob on shift lever
‹› Securing with Hose Clamp Pliers (V.A.G 1275 )
3
Center console trim
‹› Removing and installing together with shift knob => [ Shift Knob with Shift Lever Boot ] See: Shift Knob with Shift Lever Boot
‹› Disconnecting from shift lever boot => [ Center console trim and mounting frame/shift